qualified luthier or repairer. Our shop favourite is Guitar Nomad’s product ‘Guitar Detailer’. route. Installing a Wilkinson bridge on a solid body electric guitar requires that the user have some woodworking experience. and the gotoh by wilkinson bridge is incredible, i gave up on OFRs because of that bridge. This type of tuner is easy to restring, when you remember a couple of things. Locking Gotoh MG-T or Schaller M6 – to remove the old string, turn the thumbscrew on the back of the tuner counter-clockwise to unlock the string. Push the new string to the hole on top of the post and start winding. © 1995-2019 Harmony Central, Inc. All rights reserved. top cavity. × etc. See the drawing – as installing the lock unit to your strap, remember to tighten the nut well. Measuring is always
The closer the pickups are, the more aggressive and “in-your-face” the tone gets. Works beautifully. Price $72.00 - $88.00. It makes for a solid unit, and looks pretty damn cool too. Press question mark to learn the rest of the keyboard shortcuts. axegrinder, October 18, 2009 in Electric Guitars. Open the saddle locking hex screw with the provided 2.5mm hex key slightly and tap the saddle to the appropriate direction. I can't wait to rock this guitar. Cleaning the strings – to prolong the life of your guitar strings, there are a couple of useful things to learn and get used to. The Gotoh GE1996 trem arm has an internal threading to adjust the height of the arm. two 1/2" holes all the way through the body. If there are crackling noises as turning the pot or switch, you can clean the part from inside the control cavity with appropriate contact spray available from electronics stores. If the guitar needs more thorough cleaning, the finish can be safely cleaned with commercially available guitar polishes available from guitar shops. looks like my next few guitars will have gold hardware. If
long drill bit to drill a hole from the bottom side of the spring cavity to
It’s not necessary to loosen the strings to adjust this type of truss rod. Tremolo action – if your guitar is fitted with fixed bridge, skip this chapter. Powered by Invision Community, Project Highlight: Wilkinson Tremolo Install. Display as a link instead, × Push the arm in place and start turning clockwise. Wilkinson Vintage Tremolo By Gotoh. Wilkinson bridges allow you to use the tremolo arm to lower the pitch of any note that you play by pressing on it, which can add style and dramatic flair to your soloing technique. Wilkinson-Mighty Mite trem is very nice, and the price is very reasonable. The posts require a 10mm hole. Drill them to the depth indicated in the instructions, roughly 1/2 inch. Adjusting the vintage type truss rod – in some of our bolt-on guitars the adjusting nut is located at the body end of the neck. Tune up again. As you have succeeded doing this, your guitar will be in tune no matter where you play on the fretboard. 01’ works great for melting the dirt off the wood before oiling it. Wilkinson/Gotoh VSVG trem – adjust the low-E string to comfortable height with the provided 1,59mm (1/16”) hex key – and follow with setting the high-E string next. It gives a little "pull up" and lots of
If you have an account, sign in now to post with your account. Repeat procedure for the rest of the strings. flag" on the drill bit. That is why we are using a "laser". Paste as plain text instead, × Attach two screws, one of each side of the spring plate, and slide the other end into each side of the tremolo block. Cut the new string to appropriate length to avoid overwinding – but don’t cut it too short – a good rule is, that you measure about 2 times the distance from tuner to another and cut from there. and flipped it over. However, our guitars are made of wood, a living material that may react to changes in humidity and temperature of your environment. The locking part should be aligned so, that the guitar rests in the “cup” as strapped on. I've heard mention the QLD Maple is similar to Mahogany in terms of workability, so I assume it's of similar strength. Once this was complete, we reattached the neck. Messages 589. and on one i made the joint of the two-piece body perfectly in the center. Wilkinson bridges allow you to use the tremolo arm to lower the pitch of any note that you play by pressing on it, which can add style and dramatic flair to your soloing technique. Wilkinson/Gotoh VSVG trem – first, check the intonation. We have included instructions for the most common adjustments, but left out repairs – fret dressing, nut filing, refretting etc – that require special tools and skills. The links have technical specs, if you are interested. Guitar polish can be used to clean the pickguard, lacquered maple or birch fretboard and metal parts of your guitar as well. Wilkinson/Gotoh WT3 and WPB2 (bass bridge) – check the intonation in pairs, two strings at a time (EA, DG, BE). Here are some acrylic trem templates available from Stew-Mac, and a Wilkinson trem template found on … I ordered my parts months ago, but only this week when I removed the Wilkinson Trem parts from the plastic wrapping did I appreciate its design. Non-locking Gotoh SD90/SD510/SE700/SG381 tuners – these instructions work for all non-locking Gotoh tuners with hole in the posts. Do not use a Sharpie here -- it will
Safety Tip: If you feel the template move
Because the guitar
Notice that this manual includes info of our most common guitar models. Wash your hands before playing and wipe the strings clean after playing – a clean cotton cloth will do in most cases, especially with Elixir strings. Remove the strings. exactly. This is, however, also a matter of taste. I see people do the coolest build threads and the task seems daunting to me. SKU: WV2SB. Lock the saddle. Note: You must use a
Do not trust the templates from anyone without verifying them
Flip the guitar around and place the spring cavity template in its proper location using the two 1/2 inch holes you drilled in Step 2. Don’t force the arm deeper than it goes easily – when it starts to feel snug, it’s time to stop. When you do a full set-up, follow the precise order described here to achieve the desired result. You need to work both with the adjusting screw (with Phillips screwdriver) moving the whole saddle back and forth, and the rotating brass barrel. We'll be using them again. Slide the Wilkinson tremolo into place and screw the two retention screws in to hold it there so it does not move when you access the back of the guitar. The
We checked it a number of times and marked the
I'm glad there are a few threads like this from time to time rather than the usual chit chat. If you change to lighter gauge, the truss rod may need loosening – and if buzzing noise occurs with open strings, the nut may have to be modified or replaced by a pro repair shop. Your previous content has been restored. this procedure, make sure you understand that it is irreversible, and it is
You should be able to see both marks here. The tremolo (and the strings) can be closer to the guitar's face, reducing the need for neck shims. You can then see a small hex screw behind the sustain block. 3. If you want it smoother, take them a little back. Changing strings – if there’s no need to clean or oil the fretboard, you can change the strings one by one. Non-floating mode – if you prefer using the non-locking tremolo only for down- bends, tighten the screws so that the baseplate stays flat on the top as the guitar is tuned up. Get two from Stew-Mac and keep one
This allows a little space for the trem to be pulled back (pitch UP). The Wilkinson (unlike the vintage Fender trem) is designed to be set-up so that at its zero-position (at rest, with the guitar tuned to the desired pitch) is parallel to the flat top of the guitar. To achieve the desired position you may need to adjust back and forth for a few times, as the tuning of the guitar changes every time you adjust the springs. I've done an install on a Floyd trem in the past, and in that case the trem posts were spaced wider than the bridge pickup route, so there was more "meat" for the trem posts to be drilled into. Follow by aligning the rest of the bridge saddles to match the fretboard radius. A HARDTAIL GS. Today's thread deals specifically with the trem installation. We reinstalled the pots, cleaned them with some Deoxit, and
I would say about 1/4" - 1/2" of wood surrounding depending on hardness of the wood and split tendencies. with the lines we had drawn on the tape. cavity. The tone was still
Slide the Wilkinson tremolo into place and screw the two retention screws in to hold it there so it does not move when you access the back of the guitar. *edit* I forgot to mention that I also had to widen the trem cavity with my router to accommodate the trem arm anchor on the Wilkinson...maybe an 1/8".